Category Archives: Green

Good news for tidalpunks

humpback whale in ocean

Photo by Andre Estevez on Pexels.com

The Guardian recently reported that according to scientists in Nature, if we take the right steps moving forward, we could have healthy, vibrant oceans again as early as the 2050s. Some bright points in ocean restoration that exhibit the resiliency of Mother Nature include humpback whale and sea otter populations that were once quite dire.

Some challenges that we still must overcome to find our tidalpunk future are overfishing, agricultural runoff, and ocean acidification due to increased atmospheric carbon dioxide. This year will be particularly challenging for life in the Gulf of Mexico given the increased rainfall expected once again in the Midwest United States which drives erosion and agricultural runoff. An increase in regenerative agriculture on the land, and sustainable fishing practices in the water would help greatly toward the goal of revitalizing our oceans.

A study from 2016 showed that protecting 30-40% of the world’s oceans from exploitation would provide a benefit not only for the creatures in the ocean, but also for the people who rely on fishing and tourism to make their living. By setting aside parts of the ocean for the wildlife that lives there, we ensure long-term viability of the ocean’s biodiversity. In 2018, the United Kingdom’s Environmental Minister became one of the first major political leaders to back the plan.

On a personal note, as a midwesterner, I’d never been to the ocean until I was twenty. Growing up in a place where the largest bodies of water were ponds and small streams, it was boggling to see the water stretch out beyond the horizon. All the different types of fish and birds that live along the shorelines here in Virginia are fascinating to watch, and the ocean waves themselves are mesmerizing. I feel a great respect for the ocean, and hope that we can help it recover from the damage caused by years of careless neglect.

Do you live near the ocean? Are there any programs in your area to help wildlife, aquatic or terrestrial? Let us know below!

Symbiosis

Decentralization of power, both political and electrical, is one of the core tenets of solarpunk. As the meme says, we’ve had the technology to transition to a decentralized, clean economy for a long time. Centralization of political power controlled by centralized corporate interests has been the chief hurdle to climate action.

Symbiosis logo - it looks like a spindly sea creature (anenome?) with the word "symbiosis" written next to it

Symbiosis is a new grassroots organization in the United States dedicated to building direct democracy to address climate change and social inequities. As an offshoot of the Social Ecology Institute, the underlying philosophy of the movement is that the broken nature of human interaction has let to our broken environment.

In order to make a concerted effort against the established corporate and federal concentrations of power, Symbiosis is positioning itself as an umbrella organization to help coordinate action between municipalists, environmentalists, and post-capitalists across North America.

As has become increasingly apparent, single-issue action has been ineffective at moving the needle toward a climate solution. Only when we build a coalition of our allies can we challenge the status quo.

There is a congress in the works for September 2019 to bring everyone together to begin the work of building communities and systems for the post-capitalist future. For more information about Symbiosis, visit https://www.symbiosis-revolution.org/.


Disclaimer: I am involved with Symbiosis, but do not speak for them in any capacity. This is my interpretation of the group based on a short time of involvement.

The Upcycle — A Review

UpcycleCoverSpiral1-2

The Upcycle by William McDonough and Michael Braungart is the followup to Cradle to Cradle. Written in 2013, it brings a decade’s worth of new information and experience to the concept of Cradle to Cradle design thinking.

If you’re interested in the circular economy and can only read one book – this is it. There is a short section at the front that recaps the underlying principles of Cradle to Cradle systems in case you haven’t read the first book. While Cradle to Cradle was groundbreaking for the concept that we should design human industry to be a positive good for the environment, The Upcycle contains many more specific examples of projects where the authors were able to achieve these ends.

For example, in the book there is a story of Dan Juhl who pairs farmers with investors for building renewables on their land. The investors get a guaranteed return on their investment for ten years, and the energy generation equipment reverts to the farmers after this period. More renewables end up on the grid, and families get an additional source of income by owning the means of energy production.

The physical book itself is a nice counterpoint to the design of Cradle to Cradle. While Cradle to Cradle was designed to be reusable in technical nutrient cycles, The Upcycle is designed with biodegradable inks and paper so that it can become a biological nutrient again. One of the main ideas of Cradle to Cradle design is that things should be delineated into two separate nutrient streams: biological and technical. Wood, paper, and things of this nature can be reused as they would be in nature by returning to the land while technical materials like plastics and metals should be reclaimed for infinite technical cycles. Preventing the creation of “monstrous hybrids” is an important goal of the Cradle to Cradle design process. These materials are amalgamations of material that are difficult, if not impossible to separate and reuse. This is particularly harmful if the materials in these hybrids are toxic in nature. The book quotes McDonough, “Let’s put the filters in our heads and not at the end of pipes.”

The Upcycle is a breath of fresh air. McDonough and Braungart show how we can rethink the way we design everyday objects to fit into the constant cycles of Mother Nature and end the insanity of cradle-to-grave mentality. Cradle-to-Cradle design is definitely the way we should be thinking  when we design technologies and objects for our solarpunk future.

Do you use any Cradle to Cradle products in your life? What has your experience been? Let us know below!

Getting my hands dirty

Last Saturday, we decided to get our solarpunk gardener on and planted some herbs and flowers. We’re in Zone 7 here in Charlottesville, so we’re trying some snapdragons and petunias outside and starting a kitchen herb garden as well. Later on we’ll be starting some peppers.

20190221_170027_Richtone(HDR)

Getting dirty

The green germination trays were printed last year in a not-so-successful attempt at growing flowers, so hopefully we’ll have better luck this year. The white bags are wrapped around small plastic pots that go into a holder that is supposed to help the herbs not get over-watered. This is a particularly big concern here in Charlottesville as we’ve noticed everything molds quite quickly due to the humidity.

8 herb packets arranged in two rows and four columns. The herbs include basil, rosemary, oregano, parsley, cilantro, thyme, dill, and sage.

Herb packets

We had to stay away from some herbs since we have cats and not all are cat-safe. The ASPCA has a good database for plant toxicity for cats, dogs, and horses. Now that everything is planted all we have to do is wait.

20190223_205912

Everything in its place

Do you garden? Are there any plants that you love to grow?

Solarpunk winters

aurora borealis

Photo by Tobias Bjørkli on Pexels.com

As we observe the winter solstice, my thoughts have turned to how solarpunks approach winter. As the days turn dark and cold, how does a society dependent on the sun continue to prosper?

Finland

If anyone knows about how to approach long nights, it’s the people who live at the poles. Finland, which was recently rated the world’s happiest country, has no shortage of darkness given it’s proximity to the Earth’s North Pole. In the northernmost parts of the country, the sun doesn’t rise for 51 days in the winter. Why are they so happy then? A stable government with minimal corruption is probably a contributing factor, along with free healthcare and college programs. In the Nature Fix, author Florence Williams suggests it’s the access to nature. Provided you don’t cut down anyone’s trees or damage their property, there’s no such thing as trespassing in Finland. Unlike in the United States where fences and no trespassing signs prohibit free passage, you can hike from one end of Finland to another without running afoul of the law. Also, the combination of low population density and relatively late urbanization, most of Finland’s population is only minutes away from a Nordic walk in the woods or one of the many wintertime diversions available to residents such as ice skating or cross country skiing. For more, check out this Buzzfeed article that is a nice summary of how Fins stay happy, no matter the weather.

white sheep on farm

Photo by kailash kumar on Pexels.com

Wool

While the vegans in the audience will groan, I feel wool is one of the best resources we have when it comes to staying warm in the wintertime. Since wool is a material that can be harvested without harming the sheep, it seems like a win-win to me. It’s important to look at how you’re sourcing the wool when you get it, but wool from a well-treated sheep will keep you warm at the expense of them getting a haircut. Is wool cheap? No. But, it mother nature has taken millions of years plus a few hundred of human intervention to develop a fabric that breathes well, is the bomb at temperature regulation, and like all natural fibers, is biodegradable. That last part is important since so much of the microplastics in the ocean are coming from washing our synthetic fabrics. REI has a great article about sustainable clothing and textile choices for more info on wool and other options to stay warm in the winter/

Geothermal heat pumps

One way to make sure things stay toasty is with geothermal, or ground source, heat pumps. Often overlooked as a source of clean power, geothermal electricity generation isn’t something that works in all areas. Geothermal heat pumps work just about anywhere though to help keep things nice and warm inside with a minimal investiture of electrical power. In short, geothermal heat pumps replace the HVAC (heating, ventilation, and air conditioning) system of a building and use the Earth as a heat sink. Since the ground is roughly 18 Celsius in most places, you can cool in the summer and heat in the winter with little energy expenditure. According to Wikipedia, these systems offer a 44-75% increase in efficiency over more traditional heating systems. The US Department of Energy has a good overview of the technology.

Solar fluid

In an interesting development announced last month, scientists at Chalmers University of Technology in Sweden have developed a fluid that can store solar energy for up to  18 years. So, excess capacity in the summer could be stored into the winter from your solar array and retrieved when needed. Since the system is heat storage, it can be converted to electricity, or could be used as a means of storing summer’s warmth to heat your home in the winter. The original paper can be found here in Energy and Environmental Science.

Person wearing a black, white, and crimson cape patterned like moth wings. Cape is wider than armspan in width, makeing the wearer appear to have moth wings.

Moth Wings Cape by CostureoReal on Etsy

Lunarpunks

I would be remiss to not mention our lunarpunk cousins here when talking about the darkest time of the year. Lunarpunks are the night dwellers of solarpunk society. They are a subculture within our subculture, favoring the night. Biomimmicry of bioluminescent creatures, moth-themed cloaks, and gossamer fabrics fluttering in the night breeze are some of the aesthetic influences here. Winter would be the lunarpunk’s time to be more active, hosting all kinds of events in the cooler nights from art displays to street festivals.


Do you have any thoughts on what solarpunk winters might be like? Let us know below, or consider submitting a story to World Weaver Press’s call for stories for their Solarpunk Winters anthology which opens in January!

What is Solarpunk, anyway?

photo of smiling woman in white dress and brown boots posing in multicolored glass house

Photo by Jeremy Bishop on Pexels.com

The first thing you need to acknowledge when looking at solarpunk is that the world is on fire. The last few centuries of human development have taken a growth-at-all-costs approach to building up human society, and unfortunately, the bill is due. Solarpunk began as an attempt to imagine a brighter future wherein humans managed to transcend our current predicament and come out better for it on the other side. What began as a smattering of neat drawings and inspirational ideals is slowly coalescing into a movement to take back the Earth from the powers that would see it smolder.

Where is the punk in solarpunk? It’s in direct action to oppose ICE and police violence. It’s in the community energy coop putting solar panels on their roofs to save money. It’s the guerrilla gardeners throwing seed bombs into fenced-off abandoned properties. It’s in the schools where transgender students are welcome in the bathroom of their choice. It’s in the makerspace where people are finding ways to repurpose waste into useful and beautiful items. It’s remaking society into that hopeful future. The punk of solarpunk is in the now. The solarpunk future won’t happen without a concerted effort by a lot of people to fight the status quo and the powers keeping things that way.

Solarpunk doesn’t have one encompassing political or aesthetic vision. I think the most cohesive elements though are equity, environment, and appropriate technology. Equity is more complicated than simple equality, as it requires us to make sure everyone has what they need, which may not be the same exact thing as demanded by equality. For example, living with disabilities is more expensive and results in most disabled individuals having poor economic outcomes. While the exact method of providing an equitable society is something that will need experimentation, that goal is one of the central tenets of solarpunk.

Keeping the environment in mind as a stakeholder in all decision-making processes is another important theme in solarpunk. From the name, you can tell that solarpunk prefers a renewably-powered future, but reducing plastic waste, air and noise pollution, and waste are also environmentally-motivated goals of the solarpunk community. We’ve only got the one planet, so let’s make sure to keep Mother Earth in good shape. She doesn’t need us, but we need her desperately.

Appropriate technology is the idea that we don’t necessarily need “smart” everything in our lives. While solarpunk doesn’t eschew technology like some primitivists, solarpunk is interested in only using the appropriate level of technology for the task at hand and not making technology for technology’s sake alone.

If you’re concerned about climate change or the growing march of fascism across the globe, you might already be a solarpunk and not know it. To learn more check out the Scuttlebutt social network or look for #solarpunk on Mastadon or Tumblr. If you have any questions feel free to use the contact form on this website or comment below.

A Survey of Climate Action in the US

antique antique globe antique shop antique store

Photo by Pixabay on Pexels.com

I recently found that the Weather Channel has a very exciting series of stories about climate change and adaptation on their website. There’s an article for each of the 50 US States talking about the challenges facing that particular area as well as innovative approaches locals have taken in adapting or mitigating some of those effects.

As a proponent of decentralization as a core tenet of a solarpunk society, I think this series does a good job of outlining ways that people can fight climate change on their own terms. I think everyone would be willing to admit that the US federal government isn’t going to be taking action anytime soon, so it’s up to us to fight climate change in our own communities and find innovative solutions to the problems brought on by the change that has already happened.

What are you doing to fight climate change in your home? Are there any awesome solutions from overseas that would be great transplants to the USA? Let us know below!

LEGO Human-powered tool station

LEGO Modular Tool Station

Technic Man pedaling his tool platform

I had some time to make a crude LEGO prototype of the human-powered tool station.  I made do with meshed gears instead of pulleys since I didn’t have any rubber bands to use as a belt. Given some of the constraints of spacing with LEGO, our brave Technic Man can’t actually pedal the machine, but I think it does get the idea across more or less.

LEGO Modular Tool Station Internal Workings

Some of the internal workings of the LEGO prototype

Do you have any thoughts about the system? Are there LEGO parts that you like to use for prototyping purposes? Let us know below!

GoSun Fusion oven on Kickstarter

Want to cook with the sun?

4fabbbe344a1fb6238d2f1df2348cdb2_original

GoSun has been making solar ovens for awhile and is now Kickstarting the GoSun Fusion which can use either solar power or electricity to cook a meal for up to five people. I don’t have any affiliation with GoSun, but their ovens have pretty good reviews, and I really like the idea of being able to cook with the sun both day and night.

I think this oven looks like it would be really awesome if you have an off-grid house or do a lot of campground camping where you have a base camp. It’s probably too big to use for backpacking, although it does look like GoSun has a smaller model that might work for that, the GoSun Go.

Do you have a solar cooker? Do you know of any good DIY plans that we should try out here at Solarpunk Station? Let us know below!

Seizing the means of production – What does 3D printing mean for solarpunk?

Solarpunk Station is the proud owner of a new 3D printer! I am hoping to use it to produce useful objects as well as provide insights on how distributed manufacturing relates to solarpunk. This should be the first of many articles related to additive manufacturing.

2018-05-09-22-24-56.jpg

TL;DR: 3D printers have a lot of promise to disrupt manufacturing of household goods, but don’t get one yet if you’re not ready to tinker.

Most consumer 3D printers are basically a hot glue gun that uses plastic filament instead of glue sticks. A nozzle is suspended above a platform and computer-generated files are fed to the machine where it deposits plastic layer by layer to form a 3D object. There are other types of 3D printers that use UV light and/or lasers to form objects layer by layer from vats of goo or powder, but the basic idea is the same.

The main advantage of 3D printing is how it changes people’s mindset in relation to goods. If you spend some time on Thingiverse or Youmagine you’ll see people openly sharing things they’ve designed with each other. There are also some marketplaces like Cults3D that include a section for designs for sale, but the bulk of current design work is open. We’re moving from distributed, open software development like Linux and Firefox to distributed and open development of physical items.

Pineapple-inspired bowl (orange) with green leaves surrounding the edge. Only five of the 10 leaves are finished.

The orange part of the bowl took 30 hours to print. The leaves each took about an hour, so there’s ~35 hours of print time here. Total time was over 40 hours once all 10 leaves were finished.

Remixes take the open nature of 3D printable designs to the next level. People can adapt a previous design to a different device, or take a part and make it better, stronger, or faster to print. Since so many files are open source you’re free to adapt an item to your needs. I can’t count the number of times I’ve thought that something I’d purchased was pretty cool except for one issue that I repeatedly turned over in my head. Without an easy way to make a replacement part, I was stuck with it. Now with a 3D printer, I can download a design, change anything I don’t like and upload my remix for others to find. While watching a part print can feel excruciatingly slow at times (the pineapple bowl took almost two days at 130% size), making something and being able to iterate on the design is still much faster than with most other methods.

These remixes extend to things you already own too. While I can’t print a replacement saucepan yet, I can repair or improve a lot of objects around the house. There’s a great subreddit for functional prints with lots of cool ideas, and Thingiverse has a pretty big section for replacement parts. DeskGrown is a new company that sells parts that can’t be printed for their designs and gives away the printable files for free. They have a clock and a set of headphones so far. I think we’ll see more of this hybrid model popping up since desktop 3D printers are limited to plastics at the moment.

While to some extent, 3D printing is over-hyped, I think it will be one of the critically enabling technologies for a solarpunk world. Not everything can be 3D printed, but a lot of everyday objects can be, meaning you can ship 1 kg of filament to your house and make several things for the same amount of packaging, cost, and environmental waste you would have for one item before.

The two main drawbacks of 3D printing are the learning curve and generation of plastic waste. As a beginner, I have had several failed prints. I believe the number of failed prints will go down considerably as I get more experience with the printer, but 3D printing is still not a zero waste manufacturing process. I am keeping failed prints and other scraps in a bag in hopes that I will be able to reprocess it into fresh filament in the future.

Failed cat ball toy print looks more like spaghetti...

This doesn’t look like a cat ball…

The plastic I have been printing is PLA (polylactic acid) which is a bioplastic made from various plant-based sources. It is biodegradable and can be recycled in a closed loop back to virgin material standards, making it one of the few Cradle-to-Cradle plastics available. Many other materials are available for 3D printers including ABS (often used in car parts), PET (soda/water bottle plastic), wax for metal casting molds, and TPU (flexible/rubbery plastic). With such a wide variety of materials available, it’s difficult to determine the exact environmental cost of 3D printing. If PLA were able to sate everyone’s needs, then we wouldn’t have the Great Pacific Garbage Patch, but every material has it’s strengths and weaknesses, so that isn’t the case. On a bright note, PLA is one of the easier plastics to print with, so it has one of the highest adoption rates in the community.

We’re a long way away from the ease of use of the replicator in Star Trek. Using a 3D printer requires a lot of fine tuning and trial-and-error. I imagine the off-the-shelf solutions are better than kits, but 3D printers are still a large time investment. We’ll probably get to the point where you can buy one that just works, but as of now, a 3D printer requires a lot of time to get really good results.

If you’re the kind of person who likes to build your own computers or work on bicycles and really know what’s going on with the machines you’re using then I definitely recommend getting a kit. Otherwise, you’re probably better off finding someone locally with a printer on Make XYZ, 3D Hubs, or getting a design printed straight from Thingiverse or Shapeways. In fact, you may want to reach out to local 3D printer folk even if you do want to get a printer yourself. Most people who are 3D printing are glad to share their opinions on different models as well as tips and tricks to get better results. There may even be a Meetup in your area.

3D printers will play a role in distributed manufacturing along with CNCs, laser cutters, and other machine tools. We’re a long way away from asking Alexa to make “Tea, Earl Grey, hot,” but we may get there eventually. The space has moved very quickly over the last ten years, and I expect the next ten will be equally exciting.

Do you have a 3D printer or know someone who does? Are there any solarpunk ideas that are particularly well suited to 3D printing you’d like to see us explore? Sound off below!

More butts on bikes

Bike ride

The Shift Up Bicycle Podcast is about getting “more butts on bikes” and recently launched a series called “Bridging the Gap” to discuss the issues facing female and female-identifying cyclists. As of now, 75% of trips by bike are taken by males, and since human-powered transit is an important part of a solarpunk future, growing the number of trips taken by bike is critical, especially for underrepresented communities.

Arleigh, AKA Bike Shop Girl, meets with guests each week to talk shop, discuss advocacy tactics, and encourage people to find ways to bring more people into the cycling fold. You can find more information at her new website, Bike Here, which is particularly aimed at the new cyclist.

Some other great resources for both new and veteran cyclists are Just Ride by Grant Petersen, and Bikenomics by Elly Blue. Just Ride is a refreshing take on the important parts of riding a bike, dispensing with the helmet and Lycra-clad image that intimidates many new cyclists. Bikenomics makes a case for how bicycle infrastructure can quickly pay for itself by increased economic activity and wellness. I’ll add them to the Resources Page, but you might also want to cruise around Microcosm Publishing as a lot of their books and zines are particularly applicable for solarpunks regardless of your interest in bikes.


Image is “Bike ride” by Jaime González via a CC-BY 2.0 License

Urban Ore – What the future of Zero Waste looks like

UOR-header-logo

The Institute for Local Self Reliance podcast recently chatted with the founders of Urban Ore in Berkley about how they divert waste from the landfill and are able to make a living from the old adage: “One man’s trash is another man’s treasure.”

While a lot of what Urban Ore sells is architectural salvage, they also have clothing, books, sporting goods, and many other items. Urban Ore mostly gets their salvage from the municipal waste stream in Berkley, so it’s an interesting case study in better ways to manage garbage in an urban environment. It makes a true Zero Waste future not seem so crazy after all for us solarpunks.

Urban Ore also has a really interesting employment compensation structure where everyone, including the owners, gets an hourly wage. The base wage depends on the job employee does, but they make more on top of that based on sales pro-rated to how much they were working that week. No specific commissions are given, just a profit sharing bonus tabulated each week. I think this is a good company to look at for ways to plan equitable compensation for solarpunk jobs.

For other interesting podcasts, check out the Resources page.

Have you heard of any other groups or companies doing similar work? Sound off in the comments!

Glee Gum – A solarpunk gum?

As a solarpunk trying to reduce my impact, I’ve been looking for easy switches to more sustainable products. I chew a lot of gum, but when I started doing more research I found that most gums on the market contained plastics that don’t break down in the environment. While I’m not plastic-free, I wanted to find gum that tasted good and didn’t leave a permanent mark on the planet. Enter Glee Gum.

2018-02-25 21.30.43

I found a store in town that had it and grabbed two different flavors to try: peppermint and lemon-lime. I stick to sugar-free as my teeth need all the help they can get, but Glee also makes sugar gum. Like most fruity gums, the lemon-lime loses its flavor pretty quickly, but the peppermint has better staying power.

Glee is a bit softer than the Trident White gum I’m switching from and it doesn’t end up getting super hard if you chew it for more than 30 minutes like the Trident did. The main disadvantage of Glee Gum is that it is a bit stickier than most mainstream gums. The advantage is not having to deal with empty blister packs of gum.

Empty blister pack of gum

Glee Gum comes in either recyclable cardboard boxes, plastic pouches, or giant 400 piece tubes if you order it in bulk from their website. I decided to order a tube of peppermint from the website after my initial testing was complete. It was shipped in a cardboard box stuffed with newspaper. They even included a little sample of sugar-free watermelon gum! I was super-excited that all the packaging was recyclable and the cost per piece of gum is about the same as the Trident White I was getting at the grocery store, even when I include shipping costs.

Glee Gum Coupon CHEWMORE - Save 15%

Glee Gum Coupon CHEWMORE – Save 15%

Glee has an extensive “Learn More” section about how they make their gum here, and I think they’re making a great product in a really responsible way. You can find a local store that carries Glee Gum on their website, or get it on Amazon here. You buy it online from their store which I think is the only way to get the giant 400 piece tubes.

Do you chew Glee or know of some other good options for solarpunk gum? Sound off in the comments!

Re-purposing malls as solarpunk co-housing

One of the best ideas for solarpunk co-housing I’ve seen is Bluelightning42’s post about re-purposing malls on Tumblr. While there has been the mixed use redevelopment of the Arcade in Providence, Rhode Island, and NewLab, an incubator+housing in Brooklyn, I’ve seen little else done in regards to this concept.

bBellevue Square Mall courtesy of Debs (ò‿ó)♪

Business Insider ran a story last year as part of it’s “Death of Suburbia” series talking about the roughly 25% of shopping malls in the US at risk of closing. I think the main issue is that most malls aren’t in particularly easy to access areas, but with a large enough community, I think you could get a public transit stop (if there isn’t one already) and car-sharing to provide off-site transportation. If you want to see the really cool architecture in some of these malls, Seph Lawless has been getting amazing photos of abandoned malls.

Rezoning the mall (where needed) as mixed-use would allow some small stores on-site for groceries and other small items. I know that I would love to be able to just walk down the hall to grab some Swedish fish out of a bulk bin in the middle of the night (I’m so healthy). You could leave the food court going too with shared communal kitchens and restaurants run by the people living there.

13714826875_1c9fed839b_kGarden courtesy of cuprikorn

Most of the parking lots could be reclaimed as greenspace, leaving a small area for car-sharing vehicles and the bus stop. A community garden could spring up where there was once only asphalt. Depending on the bike infrastructure in your city, you might also be able to build spur trails from the mall to other interesting parts of town.

Most malls have some natural lighting, so why not make some of the skylights stained glass to keep up the solarpunk vibe? With the huge roofing area of a mall, you could generate power for residents by adding solar panels and small wind turbines. There might be enough area that you would qualify as a small-scale renewable power plant. I would want to update the HVAC system to heat/cool with a geothermal heat pump to maximize the efficiency of the building along with the other requisite insulation and lighting efficiency upgrades.

3181390371_4015ff71df_bStained glass in Kaohsiung City courtesy of MiNe

So, do you have any ideas about how a repurposed mall could be a great place to live? Are there any concerns that you have regarding the idea? Sound of in the comments and let us know!


Photos are from Flikr users under a Creative Commons License

  1. Prettyy!! Want! {Nature/ 1 of 3} by Debs (ò‿ó)♪
  2. MiNe-KissX_103-0082RG by MiNe
  3. Garden by Cuprikorn (this picture is under a different license: CC BY-NC-ND 2.0)

Solarpunk transformative living

Solarpunks should definitely check out LifeEdited, started by Treehugger founder Graham Hill. Their first prototype apartment was built in NYC to see how much life you could get out of a relatively tiny apartment. They managed to reduce their impact on the environment by fitting a 2-bedroom apartment with room to serve a dinner party of ten in a 420 square foot space!

After an even smaller second apartment, they’ve designed an entire off-grid house with solar panels, battery backup, composting toilets, and since it’s in Maui, plenty of room for surfboards. While all three projects had substantial funding, the underlying techniques used to enhance the spaces are applicable anywhere and and serve as a great inspiration on how to more efficiently use the space you have.

LIFE EDITED_MAUI_JAN2018_IMG_8645LifeEdited Maui

All of the furniture in the apartments and house is multi-purpose. In a place like New York City, where price per square foot is so high, even for renting, the high price of a transforming Murphy bed/couch from Resource Furniture would quickly pay for itself, although if you’re more inclined to DIY, then you can find Murphy bed kits for $200-300 without the mattress.

This slideshow requires JavaScript.

Transforming tables and folding chairs are often easier and cheaper to get. We have a dining table with leaf that we can remove when we want to save space. This gives us enough room when family visits for eating, but the ability to have a smaller table when it’s just two or three of us. My parents have a gate-leg table for family visits with chairs that fold up and fit inside the table so it only takes a small amount of room unless needed. A gate leg table and a Murphy bed would be great if you like having friends over for dinner but live in a small space.

LIFE EDITED_MAUI_JAN2018_IMG_1120

I shouldn’t find the composting toilet in the bathroom to be the most exciting feature, but I do.

Composting toilets eschew the current trend of flush toilets by treating waste in a waterless or low water manner, composting the waste instead of using clean water to flush it miles away to a treatment facility. I’ve mostly seen them used in off-grid cabins and tiny houses to date, but hope that systems with remote waste collection will allow for usage in more urban environments in the future. Especially in the U.S. where we treat all of our water to drinking water quality (a whole post in itself), using clean water to flush waste back to be treated again is just silly.

Do you have any cool pieces of transforming furniture? Have you used a composting toilet? Let us know about any pluses or pitfalls below, and thanks for stopping by!


via LifeEdited

Photographs by Shawn Hannah

A few Murphy bed DIY kits/plans (I have no affiliation with any of the following; just thought they might be helpful to start your search if you’re interested.)

And a set of plans for a gate-leg table and chairs: http://woodarchivist.com/3259-folding-table-chairs-set-plans/

Solarpunk jobs webinar (updated)

EDF Jobs Webinar

If you’re looking for a solarpunk job, the Environmental Defense Fund (EDF) is running a webinar on March 1, 2018 to help you get the lay of the land. You can sign up here.

If you’re looking for more info on solarpunk jobs, check out my review of Green Jobs: A Guide to Eco-Friendly Employment.

UPDATE: In case you missed it, the webinar was recorded and is now on Youtube. You can view it here: https://youtu.be/WyRdhecH0X8.


Image is from EDF email about the webinar.

Solarpunk and how climate affects diet

Climate-One-10-Years-350_0

Climate One is an excellent podcast put out by the Commonwealth Club of California on a weekly basis that I would recommend to all solarpunks. It features luminaries discussing the environment regarding our energy and water future. The most recent episode, “Climate on Your Plate,” is a remix of several previous episodes on the subject of climate change and our food systems.

One of the main takeaways that I think is surprising for most people concerned with environmental sustainability is that grazing animals can be an important component to sequestering carbon and rehabilitating our farmlands. Nicollete Hahn Niman, author of “Defending Beef,” points out that grazing animals have always been an integral part of the nutrient cycles of grasslands. Mismanagement of animal agriculture (see CAFOs) has played an important role in climate change and the reduction of ecosystem vitality in soils. While Kip Andersen, director of “Cowspiracy,” disagrees with the entire concept of animal agriculture, he and NRDC Food and Agriculture Director Jonathan Kaplan agree that eating less meat is a win for the planet.

While eliminating meat from your diet completely might be difficult or impossible based on a number of factors including health and social customs, Brian Kateman, President of the Reducetarian Foundation, suggests that everyone can lower their meat usage a little which can help the Earth a lot. One of the main tools towards this end is implementing “Meatless Mondays” where you eat no meat on Mondays and the rest of the week is up to you.

Also discussed is the role of GMOs and organic food in the development of sustainable agriculture. One of the main dangers of current commercial farming is the overuse of pesticides like glyphosate, a.k.a. Roundup. This often gets lumped in with the use of GMOs as many of them do currently come bundled with pesticide use (Roundup Ready), but GMOs are a technology that is unfairly vilified by many environmentalists. While the overuse of pesticides is dangerous, appropriate use of GMOs to reduce water and pesticide use in organic farming operations is possible.

TL;DR: Cows and GMOs aren’t the problem, the industrial food complex is. To learn more check out “Climate on Your Plate,” a podcast from Climate One.

 

KitchenMade Measuring Cups Review

2018-02-07-17-26-43_origSolarpunk living includes a pretty strong waste reduction component as part of being environmentally conscientious. One of the simpler ways to reduce the amount of waste you generate is to cook your own food. While the greenest measuring cups are the ones you already have, if you are in need of a set, the KitchenMade Stainless Steel 6 Piece Stackable Set is the best I’ve come across. The measuring cups are each made from just one piece of stainless steel, so they are easy to clean and could be recycled if needed. Short of being hit by a truck, I don’t see how they would break and need recycling though.

2018-02-08-12-17-05

Besides their indestructibility, the best feature is the little indents on the sides for smaller measurements. For instance, the 1 cup also has gradations for 1/2 and 3/4 cups. This is great when you’ve been cooking a lot (Thanksgiving, anyone?) and your 1/2 cup is already dirty. The little gradations aren’t deep enough to trap anything from getting cleaned, and I usually just throw mine in the dishwasher. The only real downside to these measuring cups is that the labels for the gradations are written from the outside. Since the labels are stamped into the metal, you can see them from the inside, but you’ll need to read backward to know what the measurement is.

2018-02-07-17-26-22
At the time of writing, the KitchenMade Stainless Steel 6 Piece Stackable Set is $23. There is also a combo of the KitchenMade measuring cups and measuring spoons available for $30.

Green Jobs: A review

green-jobs_orig

Green Jobs: A Guide to Eco-Friendly Employment (2008) promises the following on its back cover:

> Get up to date on the green movement’s latest trends
> Choose a career that’s good for the environment — and for you!
> Go for extra training, if needed
> Learn about the exciting advantages of “green collar” employment

Let’s look at how it stacks up…

This book was published in 2008, so we get an interesting snapshot of the “green revolution” right before the Great Recession caused a major setback to climate action. Having 10 years of perspective on where things have gone gives a bittersweet read of what the authors expected of the future. A few of the technologies touted in the book have proven to be dead ends, including a particularly bullish look at fuel cells. Refreshingly, there is some treatment of the geothermal industry which is an often overlooked part of the energy puzzle.

As far as finding a career in the green industry goes, this book has a lot of good resources on companies and organizations to investigate, broken down by job type and skill set. Some of the companies are now defunct, but there is enough information here to get you started looking into interesting industries and finding positions that are a good fit for your particular set of skills and training.

Many community colleges and universities now have programs either in green trades or degrees available. Many of these programs were just starting in 2008, so there may be good programs now in your neck of the woods. As a quick example, the solar industry now employs more people than the coal industry, and most of those workers are in the solar installation business. A large number of schools offer training for the skills you need to install solar panels all around the United States. I suspect this is similar in other countries, but I’m not super-familiar with education abroad.

The primary advantage of getting a job in the green industry is having a job that aligns with your personal values. Some other possible benefits include getting help with cycling or using public transit to go to work. Some companies are headquartered in LEED certified buildings as well, reducing your impact and exposure to VOCs further. Most green jobs will come with your standard benefits of 401K, health insurance, etc. as well.

TL;DR: Green Jobs is a good read, and while some of its information is outdated, it is still a solid starting point if you want to get a job in environmentally sustainable businesses/organizations.

Disclaimer: I use Amazon affiliate links to help keep the lights on here at Solarpunk Station. I borrowed this book from my local library, so you might check out yours to see if you can read it for free. If you do decide to buy, using the links here will help keep the site running. Thanks!