Category Archives: lunarpunk

What is energy democracy?

At first glance, energy democracy is a funny term. Are we worried about a coalition of coal and natural gas blocking amendments to a bill from wind and solar? Is nuclear over in the corner putting forth reasonable proposals while everyone backs away slowly because of rumors regarding her volatile temper?

Solar Farm by Michael Mees via a CC BY 2.0

Solar Farm by Michael Mees via a CC BY 2.0

Energy democracy is actually about bringing self-determination of communities back to energy generation, storage, and distribution. Not that long ago, most of society ran on locally-sourced energy. The bulk of this was in the form of windmills, water wheels, and wood-burning fires. As fossil fuels took the stage during the industrial revolution, energy supply and demand became estranged. Economies of scale for fossil fuel-based energy generation led to the creation of large power plants that supply power over an interconnected grid.

The 21st Century has seen the return of distributed energy sources. While solar and wind get the headlines, small modular reactors (SMRs), in-stream hydro, tidal, geothermal, and other distributed energy sources are showing promise as well. While the growth of these distributed generation technologies is good for decentralized solarpunk communities, it creates a point of friction with the existing centralized power grid. This is why when incumbent utilities do support renewables, they still want to build large, utility-scale projects. Nevada has had the most public battle over net metering in recent years, but many utilities have tried to suppress energy decentralization by pressuring legislators. In states like Virginia, where two companies have a monopoly on 80% of the energy market, it’s easy to see where problems might arise.

panoramic shot of sky

Photo by Pixabay on Pexels.com

There are some technical problems with energy decentralization which stem from the centralized past of the grid. As David Roberts explains at Vox, the grid was designed for one-way power flows from generation to distribution to end user. Solar, wind, and other distributed energy sources upend this model, sending power from the end-of-the-line back into the grid. There are several possible ways to overcome these difficulties ranging from going off-grid completely to piping every single generation source back into one giant grid managed by a central authority. For a solarpunk future, one possible option is the “decentralized, layered-decomposition optimization structure.” In this arrangement, the responsibilities of generation sources are held locally, but communities can still exchange power on an overarching, interconnected grid.

In some communities, such as Boulder, CO, the people have decided to municipalize their energy grid. Putting the grid into public hands makes it easier to align incentives between homeowners with rooftop solar, community-based generation projects, and the needs of all the users on the grid. Utility monopolies have to maximize profit and maintain the status quo. Energy democracy brings the power to the people, who can build a grid that uses distributed generation for a more robust, environmentally friendly, and healthy grid. The most extreme example of calls for energy democracy at the moment is the suggestion of a public takeover of PG&E. For more on areas that are flexing their energy democracy muscles, check out the Institute for Local Self-Reliance’s Community Power Map.

Do you have any energy democracy projects in your area? Let us know how your communities are fighting monopoly power and bringing clean, distributed power to the people.

Advertisements

Tidalpunk: Come Home to the Sea

A picture of a green-blue bay against a blue sky with whispy clouds. Above the bay is a rocky cliff with houses of various colors ascending the hill above it.

Photo by Pixabay on Pexels.com

Many think life on Earth started in the oceans, and while there is scientific debate on that front, there’s no denying that humans have been drawn to the water since before we built the first city on the banks of the Euphrates. With an estimated 80% of the world’s population living within 100 km (~60 mi) of a coastline, it’s no surprise that solarpunk has a sibling that brings this love of the water front and center – tidalpunk.

Tidalpunk takes the environmental consciousness and appropriate technology of solarpunk to the high seas. Sailing ships, autonomous seasteads, and cities flooded by the rising waters of climate change populate visions of a tidalpunk future. I suspect that due to the Moon’s influence on the tides, tidalpunk and lunarpunk will find some interesting synergies.

Return of the Sail

boat classic clouds cruise

Photo by Inge Wallumrød on Pexels.com

The shipping industry currently accounts for 2.3% of carbon emissions, and the industry is targeting a 50% reduction in emissions by 2050. Most cargo ships run on diesel now, but we once sailed the seas using the renewable power of the wind. While having a backup propulsion method available would be prudent, when the wind is blowing, cargo could move without the use of fossil fuels. Low Tech Magazine has written several articles about the potential of bringing back sailing ships as cargo vessels. Our current cargo fleet could even be retrofitted with tethered, kite-like sails.

Seasteading

An artificial island in a rough c-shape. It is covered in grass and has several berths for boats.
Proposed artificial Island in French Polynesia by Blue Frontiers

Seasteading covers a variety of concepts for humans to make their home in the sea. Proponents of seasteading point to overcrowding and a lack of social innovation on land as reasons to move seaward. Some projects that could be considered under this umbrella are Sealand, various underwater habitats, and aircraft carriers.

delta_printer_1-8419da34982ad3af20046088872ca1c7cedbd1d9abd347586fdab267be6a52a1

A member of Project Entropy demonstrating a delta-style 3D printer

Project Entropy is a solarpunk makerspace flotilla with the aim to address plastic waste in the ocean and convert it into useful objects. The self-described micronation is also experimenting with distributed governance while it expands the frontiers of distributed manufacturing. While the Seasteading Institute and Blue Frontiers have interesting visions of the future, Project Entropy is making it real right now. Another project already on the water is the Flipiflopi, a boat built entirely from plastic recovered from the ocean and roadsides in Kenya.

A muli-colored sailboat sits in shallow water just off a white, sandy beach. Many people are on the boat and the shore. A Kenyan flag flies high above the solar panel on the boat.

The Flipiflopi recycled boat

The SeaOrbiter science vessel is one of the most exciting projects happening in the space. Planned as a full-time, ocean-going science vessel, the SeaOrbiter will have on-board laboratories and allow extended observation of the ocean. Parts of the ship will be kept at higher pressure to allow scientists to dive more often than would be possible from a surface vessel due to decompression issues like the bends.

A profile view of the SeaOrbiter science vessel. It has a large mast which pokes 27 m above the waterline. Another 31 m of the vessel are below the waterline. The vessel has various living quarters, laboratories, and is powered by wind and solar.

A profile view of the SeaOrbiter

Flooded Cities

boat near to dock

Photo by Daniel Frank on Pexels.com

Venice is the most well known flooded city in the world, but rising seas will soon give the world a number of similar locales. Even Venice is preparing for rising floodwaters with the MOSE Project, a giant flood gate designed to mitigate the worst tides from the Adriatic. NOAA has built an Interactive Sea Level Rise Map to show what areas will be most impacted by different sea level rise scenarios. In the US, Miami is particularly vulnerable since it’s geology precludes a flood gate or wall system like MOSE.

Where to Start

If tidalpunk sounds like something you’d like to investigate further, here are some resources to check out:

Do you have any experiences with tidalpunk? Let us know below or send us a comment on Sunbeam City. Thanks for coming aboard!

Saving the world, one apple core at a time

20190120_215150

The compostable bag from our recycling center.

I don’t have a green thumb. I’m trying a garden again this year, but despite my grandparents cultivating a host of vegetables right next door to me growing up, it wasn’t ever something I really learned how to do. My fear of dirt and the outdoors as a child was a contributing factor.

One thing I’ve associated with gardening that I find extra intimidating is composting. This year, I’m going to give it a shot through the local recycling center. I picked up a little green bag when I was taking our recycling into the center, so I’ll be feeding it with food waste and plant clippings.

I really hate wasting food, but even I have my limits to how far past an expiration date I’m willing to eat something. As ILSR notes in “How Community Composting Disrupts Big Waste,” composting can create jobs, reduce food waste, and fight climate change.

Are you a composter? Do you compost at home or through your community?

The Upcycle — A Review

UpcycleCoverSpiral1-2

The Upcycle by William McDonough and Michael Braungart is the followup to Cradle to Cradle. Written in 2013, it brings a decade’s worth of new information and experience to the concept of Cradle to Cradle design thinking.

If you’re interested in the circular economy and can only read one book – this is it. There is a short section at the front that recaps the underlying principles of Cradle to Cradle systems in case you haven’t read the first book. While Cradle to Cradle was groundbreaking for the concept that we should design human industry to be a positive good for the environment, The Upcycle contains many more specific examples of projects where the authors were able to achieve these ends.

For example, in the book there is a story of Dan Juhl who pairs farmers with investors for building renewables on their land. The investors get a guaranteed return on their investment for ten years, and the energy generation equipment reverts to the farmers after this period. More renewables end up on the grid, and families get an additional source of income by owning the means of energy production.

The physical book itself is a nice counterpoint to the design of Cradle to Cradle. While Cradle to Cradle was designed to be reusable in technical nutrient cycles, The Upcycle is designed with biodegradable inks and paper so that it can become a biological nutrient again. One of the main ideas of Cradle to Cradle design is that things should be delineated into two separate nutrient streams: biological and technical. Wood, paper, and things of this nature can be reused as they would be in nature by returning to the land while technical materials like plastics and metals should be reclaimed for infinite technical cycles. Preventing the creation of “monstrous hybrids” is an important goal of the Cradle to Cradle design process. These materials are amalgamations of material that are difficult, if not impossible to separate and reuse. This is particularly harmful if the materials in these hybrids are toxic in nature. The book quotes McDonough, “Let’s put the filters in our heads and not at the end of pipes.”

The Upcycle is a breath of fresh air. McDonough and Braungart show how we can rethink the way we design everyday objects to fit into the constant cycles of Mother Nature and end the insanity of cradle-to-grave mentality. Cradle-to-Cradle design is definitely the way we should be thinking  when we design technologies and objects for our solarpunk future.

Do you use any Cradle to Cradle products in your life? What has your experience been? Let us know below!

Getting my hands dirty

Last Saturday, we decided to get our solarpunk gardener on and planted some herbs and flowers. We’re in Zone 7 here in Charlottesville, so we’re trying some snapdragons and petunias outside and starting a kitchen herb garden as well. Later on we’ll be starting some peppers.

20190221_170027_Richtone(HDR)

Getting dirty

The green germination trays were printed last year in a not-so-successful attempt at growing flowers, so hopefully we’ll have better luck this year. The white bags are wrapped around small plastic pots that go into a holder that is supposed to help the herbs not get over-watered. This is a particularly big concern here in Charlottesville as we’ve noticed everything molds quite quickly due to the humidity.

8 herb packets arranged in two rows and four columns. The herbs include basil, rosemary, oregano, parsley, cilantro, thyme, dill, and sage.

Herb packets

We had to stay away from some herbs since we have cats and not all are cat-safe. The ASPCA has a good database for plant toxicity for cats, dogs, and horses. Now that everything is planted all we have to do is wait.

20190223_205912

Everything in its place

Do you garden? Are there any plants that you love to grow?

Making it real…

As you may recall, I want to find ways to bring more practical solarpunk into my life and into the world. To that end, I purchased a Raspberry Pi 3 B+ kit made by Canakit. I’m hoping to explore some of the ideas I discussed regarding solarpunk phones and communications during the last few weeks. I’m not an electronics savant by any means, so we’ll see if my hobbyist level skills can cobble anything interesting together out of the kit.

Box containing a Raspberry Pi 3 B+ and breadboard for electronics experiments

On a related note, I also just ordered a new wifi-enabled wall switch to control the lights in our main living area. While that isn’t particularly solarpunk, I think reflashing the electronics to not be dependent on a third party service is. As sold, the switch requires downloading and using an app that sends data out to the web through servers owned by Samsung and then back to my apartment to control my lights. This is both creepy and seems silly since the lights are right above the voice assistant I’m using to control them. Why do I need servers hundreds of miles away involved in this conversation?

I’ve had good luck with the Sonoff-Tasmota firmware from GitHub for other smart home devices, and will be using the information from their wiki to attempt to reflash this new switch. Since it’s a totally different piece of equipment, I’m a little nervously optimistic about the results. If all goes well, the switch will only talk to my local network and the only connection to the outside world will be through Alexa.

Wifi-enabled smart switch with front cover removed. Green circuit board is exposed showing a TYWE3S wifi chip. Other components are hidden from view as they're on the back side of the board.

At some point, I’m hoping to switch to a more privacy-centric voice assistant like Mycroft or Snips, but getting all of my smart home devices other than my voice assistant to be local only should make the transition simpler once I do get that setup. The Raspberry Pi will be an important part of this transition as I’m hoping to begin testing Mycroft and/or Snips once I’ve gotten some of the basic input/output bits of the Pi figured out.

Raspberry Pi 3 B+ in transluscent plastic case

If all goes well, then I’ll try building a mobile voice assistant that can kick result data to a simple linked smartwatch like a Pebble. I sketched out a highly detailed schematic for your pleasure below.

Screen Shot 2019-02-21 at 3.19.46 PM

I’m not sure how hard the communication with a watch will be, but the first step will be getting the voice assistant going on the Raspberry Pi. After deciding which AI is better to work with then I’ll try adding battery power and watch communications.

What are some of the ways you are making solarpunk real? Let us know below!

Solarpunk Phones Part 4: Magic

woman reading a book

Photo by Pixabay on Pexels.com

[This is Part 4 of a series of posts. Here are links to Part 1: Repair, Part 2: Decentralize, and Part 3: Design.]

Despite marketing jargon, I don’t think that we’ve yet reached the point where our technology is “magical.” A cave person might feel differently, but smartphones, computers, and televisions are clearly tools in my eye. There are a few exceptions, but I want devices that more elegantly flow with our lives instead of us molding our behavior around the device.

In stories, magic feels more like an extension of the being wielding the power. Even when the power source isn’t from within the individual, magic is still channeled through the magic user, so they must be in tune with it, but not consumed by it.

Technology that “just works” is a step in the right direction, since few things are as un-magical as having to reinstall drivers. I think we can go farther though. For me, at least, it’s easy to get lost in the technology itself and lose sight of the end goal of the tech. To be truly magical, I think the device and interface need to melt away so we can focus on the real reason we’re using it. At their core, smartphones are devices for communication. How do we make meaningful communication with those we care about easier?

color conceptual creativity education

Photo by Pixabay on Pexels.com

Take the pencil. As long as it’s sharp, most people don’t spend a lot of time worrying about how much it weighs or how thin it is. It gets the job done and you don’t have to think much about the object itself. There are certainly applications like art where the hardness of the graphite is an important consideration, but for the majority of situations, the pencil is incidental to the outcome of wanting words or doodles on the page. The pencil is an extraordinary piece of technology because it works so well that we pay it barely any heed.

A few devices approach this simplicity: e-readers, Pebble smartwatches, smartpens, the Beeline bike navigator, the Typified weather poster, voice assistants, and most calculators. Maybe I just don’t have the headspace for multi-function gadgets, but for me, the more functionality you cram into a device, the more unwieldy it becomes. Perhaps some brilliant UI/UX designer will come up with a way to make the multi-function nature of the smartphone more seamless, but as of now, I find smartphones to be amazing but kludgy.

The people working on the Skychaser solarpunk comic are doing a great job of thinking of magical technologies. You should definitely check them out if this is something that appeals to you.

I don’t have the answers for finding the right balance of functionality and magic but wanted to explore some of the questions with you. Maybe you have some ideas of how to make technology a little more magical. If you do and want to share, please post something below!